Buhler 535, 485, 435 manual Operation Electronic Instrument Cluster EIC Timed Exit, Panel Dim

3-35 Section 3 - Operation

Electronic Instrument Cluster - EIC

Timed Exit

The Timed Exit feature enables the worklights and headlights to be set to remain on for a period of time after the tractor has been switched off..

The TIMED EXIT button (1) is used to set up the exit timer.. Pressing the switch once will temporarily display the status of the timer in the lower section of the central LCD panel.. Pressing the TIMED EXIT button while the status is displayed will cycle forward through each of the possible timer settings.. The timer may be set in 10-second increments up to a maximum of 60.. When the timer is set to zero, the display will show “OFF..”

When the key switch is turned off, the worklights and headlights will stay on for the specified number of seconds..

A “Timed Exit” status light (2) illuminates whenever the timer is set..

3 1 2

Panel Dim

The PANEL DIM button (3) controls the brightness of the EIC backlight and the warning lights..

The EIC maintains four brightness settings:

1..Daytime Dim

2..Daytime Bright

3..Night Dim

4..Night Bright

Pressing the PANEL DIM (3) button toggles between “Bright” and “Dim” settings.. When the headlight/ worklight rotary switch is in the “OFF” position, The “Daytime” settings are active.. With the headlight/ worklight rotary switch “ON” the “Night” settings are active..

The brightness of the active set-point can be set to any level between 1 (dim) and 11 (brightest).. To increase/ decrease the brightness level, hold down the PANEL DIM switch (3) while pressing the UP arrow button

(4).. To decrease the brightness level, hold down the PANEL DIM button (3) and press the DOWN arrow button.. Each time the arrow button is pressed, the brightness will increase or decrease by one level.. All four settings will be saved when the key is turned off..

4

435/485/535