|
| |
|
| Section 5 - Troubleshooting |
|
| Cab |
|
|
|
Cab |
|
|
|
|
|
Problem | Possible Cause | Correction |
|
|
|
|
|
|
Dust enters the cab | Improper seal around filter element. | Check seal condition. |
| Plugged filter. | Clean or replace filter. |
| Defective filter. | Replace filter. |
| Excessive air leak(s) in cab floor, | Seal air leak(s). |
| windows, or door. |
|
|
|
|
|
|
|
Pressurizer air flow low | Plugged filter. | Clean or replace filter. |
| Heater core or evaporator core | Contact Buhler Versatile dealer. |
| plugged. |
|
|
|
|
|
|
|
Cab windows fog up | Excessive moisture in cab air system. | Position air vents toward windows. |
|
| Use |
|
| recirculation control along with the |
|
| heating system to dehumidify cab air. |
|
| Check |
|
| restriction. |
|
|
|
|
|
|
Heating system does not | Defective engine thermostats. | Contact Buhler Versatile dealer. |
heat | Heater core plugged. | Contact Buhler Versatile dealer. |
| ||
| Heater valve shut off at engine. | Turn on heater valve at engine and |
|
| adjust temperature control knob to |
|
| the heat position. |
| Cab heater valve not functioning. | Contact Buhler Versatile dealer. |
|
|
|
|
|
|
Condenser plugged. | Clean radiator, oil cooler, and | |
cool |
| condenser. |
| Low refrigerant. | Check sight glass for bubbles. |
|
| Contact your Buhler Versatile dealer. |
| Compressor belt slipping or damaged. | Check belt tension and belt condition |
| Heater control turned on. | Turn temperature control knob fully |
|
| counterclockwise for maximum |
|
| cooling. Shut off heater hose valve |
|
| at engine. |
| Fuse or relay defective. | Replace fuse or relay. |
|
|
|
435/485/535