Section 3 - Operation
Hydraulic Operation - Manual
The second position (3) prevents the control lever from entering the float position..
The final position (4) has two functions.. It will lock the lever into the neutral position to prevent accidental actuation of the lever.. If the lockout lever is moved to this position while the control lever is in the retract position, the control lever is limited to travel between the float and retract positions.. This position can be used for continuous flow applications..
By limiting the travel of the remote control lever from returning to the neutral position during continuous flow applications, the lockout will protect the hydraulic system from pressure spikes created by hydraulically driven implements during implement shutdown..
IMPORTANT: When shutting off hydraulically driven implements, place the remote lever in the float position to allow the implement to coast to a stop. Shut the tractor off and place the remote lever in the neutral position.
| H |
| N |
| R |
| N |
3 | |
|
H |
N |
4 |
|
