Buhler 435, 485, 535 manual Lubrication & Maintenance Every 300 Hours Operation

4-28

Section 4 - Lubrication & Maintenance

Every 300 Hours

Operation 34

Change the Transmission Oil Filter

(1407 Twindisc Powershift Transmission Only)

The transmission filter (1) is located inside the front frame on the right side of the tractor directly below the engine..

The transmission filter is a spin-on type and is removed by turning it counterclockwise..

NOTE: Dispose of used oil filters in accordance with federal, provincial, state, local laws and environmental regulations.

To install the new filter, lubricate the O-ring on top of the new filter with clean transmission oil.. Install the filter to the filter head, hand-tightening until the seal contacts the filter head.. Tighten the filter an additional 1/2 to 3/4 turn..

NOTE: Some oil, approximately 0.95 L (1 qt.), may be lost when the filter is unscrewed from the filter head. Be sure to replenish the lost oil.

Start the engine and check for leaks at the filter..

Replacement transmission filter P/N: 86029162

1

F4-55

435/485/535