3-
Section 3 - Operation
Cab Features - Seating
Deluxe Seat
The seat is equipped with controls to permit the following adjustments for personal comfort..
NOTE: All adjustments should be made in the following order while sitting in the seat.
Adjust the seat using the following procedures:
NOTE: With the engine off, adjust the seat by turning the ignition switch the “ACC” position.
DO NOT START THE ENGINE.
1. Height/Weight Adjustment 
Depress the top of the switch to raise the seat.. Release when the desired height is obtained..
Depress the bottom of the switch to lower the seat.. Release when the desired height is achieved..
2. Backrest Angle Adjustment 
Lift the lever and tilt the backrest to the desired position.. Release the lever to lock the backrest in position..
NOTE: The backrest will tilt backward far enough to contact the rear window.
3. Fore/Aft Float 
Pull up on the lever to allow the seat to float fore and aft 51 mm (2”).. Push down on the lever to lock the seat into position..
4. Lateral Float
Pull up on the lever to allow the seat to float laterally 51 mm (2”).. Push down on the lever to lock the seat into position..
5. Swivel Adjustment 
Pull up on the lever to swivel the seat.. Push down on the lever to lock the seat into position..
6. Fore/Aft Position Adjustment |
|
| ||||
Pull | up | on the lever to | move the | seat | forward | |
or backward to the desired | position.. Push down | |||||
on | the | lever to lock | the | seat | into | position.. |
| 1 |
6 |
|
5 |
|
| 2 |
4 |
|
3 | 7 |
|
7.Storage tray Pull out for access..
