Buhler 435, 485 Cabin Temperature Optional, Fuel Per Hour, Fuel Per Area, Distance Measurement

3-39 Section 3 - Operation

EIC - Tractor Performance Monitor (TPM)

Distance Measurement

Touch the SELECT button (1) again and the “DIST FT” (2) or “DIST METERS” legend will be displayed.. The tractor will now measure distance in feet or meters.. Operate the tractor normally and press the START/STOP button (3) at the point where distance measuring is to begin.. The “ON” legend (4) will be displayed along with a digital display of distance traveled (5).. At the end of the distance, again press the START/STOP button (3).. A digital display of distance traveled (5) in feet or meters will be displayed with the “OFF” legend (6).. If the START/STOP button is again pressed, additional feet or meters will be added to the existing measurement.. Pressing the START/STOP button (3) for more than three seconds will zero the display..

Cabin Temperature (Optional)

In tractors fitted with the automatic temperature control system, cabin temperature can be displayed by depressing the CABIN TEMP button (7) or by toggling the SELECT button (8).. The “Ct” legend (9) will display, together with temperature reading (10)..

7

Fuel Per Hour

Fuel per hour is displayed by toggling the SELECT button (11).. The FUEL/HOUR legend (12) will display together with rate of fuel consumption in liters or gallons per hour (13).. (For switching between metric and imperial see page 3-42)..

Fuel Per Area

Fuel per area is displayed by selecting fuel per hour mode and then toggling the UP and DOWN arrow buttons (14).. The fuel per area legend (15) will display together with the related fuel consumption in liters or gallons per hour/area..

5			AREA		PTO RPM
4			DISTANCE		START
6	ON				STOP
	OFF
	DIST FT				SELECT
	SPEED	% SLIP
	2		3		1
					F3-52
	9	10		8
			AREA		PTO RPM
			DISTANCE		START
					SELECT
	SPEED	% SLIP
					F3-54
12	15	13	11
			AREA		PTO RPM

DISTANCE START

FUEL AREA

HOUR

GAL		SELECT
SPEED	% SLIP

14 F3-55

435/485/535