Section 3 - Operation
Wheel Installation - Triple
5 |
|
6 |
Triple Wheel Configuration
NOTE: Install the wheels so that both center and outer treads face the same direction.
g.Install the twenty cap screws (6), washers and nuts through the wheel rims.. Torque the nuts to 710 N·m (525
NOTE: The drums on the center and outer wheels have large cutouts in them to assist in installing the drum hardware.
h.Repeat the above procedure for the other three sets of triple wheels..
i.Drive the tractor, steering from lock to lock.. Park the tractor and recheck the torques on the inner and outer wheel nuts as detailed in Steps e and g..
