Hydraulic Operation - Manual
Hydraulic Flow Controls - Manual
Hydraulic flow to the remote valves 1 to 4 is controlled by four rotary knob style flow controls (8).. Each knob can be rotated clockwise to increase flow and counterclockwise to decrease flow..
The knobs are color coded for identification with the remote valve it controls..
By pushing the button in the center of the knob (9) the control knob can be pulled upward or pushed downward to change the coarse flow control setting..
Each valve spool has a flow control valve to meter oil flow to that coupler.. Flow can range from a minimum of 11..4 L/min (3 GPM) to full available flow 114L/min (approximately 28 GPM)..
8
9
NOTE: For tractors equipped with six remote valves, flow to remote valves 5 & 6 (the top two sections), are controlled by rotating by hand, the valve flow control links on the rear of the remote valve manifold (10), clockwise to decrease flow and counterclockwise to increase flow.
10
435/485/535