3-71 Section 3 - Operation

External lighting

Trailer Socket

The trailer socket is attached to the hydraulic remote coupler bracket at the rear of the tractor..

It is a seven-pin connector that can be used for a trailer light hookup or as an outlet to attach an optional implement status switch..

The pins in the socket are identified as follows:

Pin 1 - Ground Pin 2 - Work lamps Pin 3 - Left flasher Pin 4 - Stop lamps Pin 5 - Right flasher Pin 6 - Tail lamps

Pin 7 - Auxiliary (key switched 12 volt source protected by a 20 amp fuse)

There is a male connector available through your Buhler Versatile dealer, (BVI p/n: 59624), that can be purchased to accommodate trailer wire harnesses..

Toolbox/storage tray

A toolbox/storage tray is located on the left front frame of the tractor.. The toolbox lid will accommodate a lock..

F3-84

71

6

2

 

53

4 F3-85

F3-116

435/485/535