4-16

Section 4 - Lubrication & Maintenance

Every 10 Hours

Operation 12

1

Lubricate the Front Steering Cylinder Pins

 

Lubricate the two grease fittings (1) (one on each side) until grease flows from around the pin seals..

This will purge any dirt accumulated in the pivot pin area..

Use Moly base grease (NLGI 1 Lithium, Moly)..

F4-20

Operation 13

Lubricate the Rear Steering Cylinder Pins

Lubricate the bottom two grease fittings (2) (one on each side) until grease flows from around the pin seals.. This will purge any dirt accumulated in the pivot pin area..

Use Moly base grease (NLGI 1 Lithium, Moly)..

Operation 14

Lubricate the Upper Articulation Pin

Lubricate the grease fitting (3) until grease flows from between the frame pieces.. This will purge any dirt accumulated in the pivot pin area..

Start the unit and articulate from side to side to work the grease into the joint..

Use Moly base grease (NLGI 1 Lithium, Moly)..

2

F4-21

3

F4-22

435/485/535