Buhler 535, 485, 435 manual Air Intake Piping / Charge Air piping

4-18

Section 4 - Lubrication & Maintenance

Every 10 Hours or daily

Operation 18

Air Intake Piping / Charge Air piping

Inspect the air intake piping, daily, for cracked hoses, loose clamps, or punctures that could damage the engine with particular attention to the two connections (1&2) between the air cleaner and turbocharger..

Tighten or replace parts, as necessary, to make sure the air intake system does not leak..

Torque Value: 8..5 N·m (75 in-lbs)

Check for corrosion of the intake system piping under the clamps and hoses.. Corrosion can allow corrosive products and dirt to enter the intake system.. Disassemble and clean as required..

Inspect the two charge air pipes (3) and four connection hoses (4) for cracks, loose clamps, or punctures that could damage the engine..

Tighten or replace parts, as necessary, to make sure the charge air system does not leak..

Torque Value: 7..35 N·m (65 in-lbs)

1

F4-13

2

F4-14

3

4

F4-98

435/485/535