4.18 Speaker/VGA fan | 4 Replacement Procedures |
Installing the Speaker/VGA fan
The following describes the procedure for installing the speaker and VGA fan (See Figure 4- 33).
NOTE: When installing speakers, make sure they are fit to the guides closely by pressing them from the top.
Pass the VGA fan cable first on the base assembly so that the speaker (L) cable passes on the cable.
1.Install the VGA fan according to screw holes on the base assembly and secure it with the following screws.
• M2⋅4B BIND screw | x2 |
2.Install the VGA EARTH SPRINGs on the VGA fan and secure them with the following screws.
• M2⋅3C SUPER THIN HEAD screw | x2 |
3.Install the speaker R along the guide of the base assembly.
4.Install the speaker L along the guide of the base assembly.
5.Arrange the speaker cable L along the ribs and fix it with the insulator and glass tapes.
QOSMIO F10 Maintenance Manual |
