Toshiba 960-498 manual Hdd, HDD Replacement Procedures, Removing the HDD

HDD assembly CN1800

M2.5x10B FLAT BIND

4.3 HDD 4 Replacement Procedures

4.3HDD

Removing the HDD

The following describes the procedure for removing the HDD (See Figure 4-4 and 4-5).

CAUTION: Be careful not to drop or leave screws in the PC.

Take care not to press on the top or bottom of the HDD. Pressure may cause data loss or damage to the device.

1.Turn the computer upside down.

2.Remove the following screw fixing the HDD slot cover and remove the HDD slot cover.

• M2.5⋅10B FLAT BIND screw x1

3. Hold the tab and pull out the HDD assembly from the connector CN1800 on the system board.

HDD slot cover

Tab

Figure 4-4 Removing the HDD assembly

4-12 QOSMIO F10 Maintenance Manual (960-498)