Toshiba 960-498 manual SJ board Replacement Procedures, Installing the SJ board

4.21 SJ board 4 Replacement Procedures

Installing the SJ board

The following describes the procedure for installing the SJ board (See Figure 4-37).

1.Pass through the SJ board flat cable into the slit of the middle frame and arrange it along the guide on the insulator. Secure the SJ board flat cable with a glass tape.

2.Install the SJ board and secure it with the following screw.

• M2⋅4Z BIND screw x1

3.Connect the SJ board flat cable to the connector CN9560 on the SJ board.

4.Connect the microphone cable to the connector CN6000 on the SJ board.

4-56 QOSMIO F10 Maintenance Manual (960-498)