Toshiba 960-498 CD Sound Standard test, Pass Count Write Data Read Data Address Xxxxxx Status XXX

3.30 Sound Test program 3 Tests and Diagnostics

3.30.3 CD Sound (Standard) test

To execute the CD Sound (Standard) test, press 3 and Enter. Insert the test media (TOSHIBA TEST CD-ROM or ABEX TEST CD-ROM) or music CD on the market (if the test media can not be prepared). The menu appears in the display.

For details on use of test media, refer to (1) Test media (Toshiba-made test media). For details on use of audio CD on the market, refer to (2) Audio CD.

(1)Test media (Toshiba-made test media)

CD/DVD TEST IN PROGRESS XXXXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end

[Ctrl]+[C] ; key stop

SUB-TEST			: XX	ERROR COUNT: XXXXX
PASS		COUNT : XXXXX
WRITE DATA			: XX	READ DATA	: XX
ADDRESS			: XXXXXX	STATUS	: XXX
01	–	Japanese Narration
02	–	English Narration
03	–	Test Tone A (100Hz – 20Hz)
04	-	Test Tone B (400Hz – 3KHz L-R)

Drive # = 0, ATAPI status =00 Command = XX

[[Block address = XXXXXXXX]] [[Block length = XXXXXXXX]]

Final : Block address = XXXXXXXXX

Subtest01	Japanese Narration
	When selecting this subtest, narration in Japanese starts and following
	message appears in the display.
	Play start CD sound !
	Press any key <Play stop>.
	Press any key to stop the narration. Then the test returns to the CD Sound
	(Standard) test menu.

3-88 QOSMIO F10 Maintenance Manual (960-498)