Toshiba 960-498 manual LCD unit/FL inverter Replacement Procedures

4.23 LCD unit/FL inverter 4 Replacement Procedures

4.23 LCD unit/FL inverter

Removing the LCD unit/FL inverter

The following describes the procedure for removing the LCD unit and FL inverter (See Figure 4-39 to 4-42).

1.Open widely the display panel and pull up both the hinge caps to remove by slightly pressing them toward the display.

2.Peel off two mask tapes and remove the following screws securing the display mask.

• M2.5⋅6B FLAT BIND screw x2

3.Insert your fingers between the edge of the display mask and the LCD, and remove the display mask while unlatching the display mask.

Mask tapes

Hinge caps

M2.5x6B FLAT BIND

Display mask

LCD

Figure 4-39 Removing the display mask

4-58 QOSMIO F10 Maintenance Manual (960-498)