Toshiba 960-498 manual Replacement Procedures 10 Fan, Removing the fan, Installing the fan

4 Replacement Procedures 4.10 Fan

4.10 Fan

Removing the fan

The following describes the procedure for removing the fan (See Figure 4-21).

1.Disconnect the fan cable from the CN8770 on the system board.

2.Remove the following screws and remove the fan.

• M2.5⋅4B		FLAT BIND screw	x2
			M2.5x4B FLAT BIND
	Fan cable

CN8770

Space

Figure 4-21 Removing the fan

Installing the fan

The following describes the procedure for installing the fan (See Figure 4-21).

1.	Install the fan and secure it with the following screws.
	• M2.5⋅4B	FLAT BIND screw	x2
2.	Connect the fan cable to the connector CN8770 on the system board.

NOTE: After connecting the fan cable, put the cable into the space under the system board.

QOSMIO F10 Maintenance Manual (960-498) 4-35