3 Tests and Diagnostics | 3.31 SETUP |
Mode 2 | Sets to Mode 2. |
| Glows blue (Power ON) / Alternately flashes green and |
| orange (Standby) / Alternately flashes green and blue |
| (Power OFF/Hibernation) |
Mode 3 | Sets to Mode 3. |
| Flashes in order of green, orange and blue (Power ON) / |
| Glows yellow (Standby) / Glows orange (Power OFF |
| /Hibernation) |
(h)Language During Bootup
This option selects the language during bootup. This message appears only on the model for TCL (Canada).
English | The message is displayed in English. (Default) |
French | The message is displayed in French. |
8.Configuration
This option lets you set the device configuration.
All Devices | BIOS sets all devices. |
Setup by OS | Initializes devices, which is needed to load an operating |
| system. Operating system initializes other devices. |
NOTE: When using installed OS, selecting “Set by OS” is recommended. But when executing test programs, select “ALL Devices”.
9.Drives I/O
This option displays the address and interrupt level for hard disk drive and optical disk drive. It is for information only and cannot be changed.
This cannot be changed. | |
| This cannot be changed. This is not displayed when a drive |
| is not |
10. PCI Bus |
|
This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed.
PCI BUS | = IRQ10, IRQ11 |
QOSMIO F10 Maintenance Manual |
