Toshiba 960-498 manual Debug port Boot mode error status 9/9

2.4 System Board Troubleshooting 2 Troubleshooting Procedures

Table 2-4 Debug port (Boot mode) error status (9/9)

D port status	Inspection items	Details
(F11Eh)		Initialization of Bluetooth (for models supporting
		Bluetooth)
		Check of existence of target maintenance card
		Prohibition of unused PC card
		Setting Wakeup status data for ACPI
		HW initialization before Boot, Waiting for initialization
		completion
		Notifies the DVI connection status to VGA BIOS (for
		models supporting DVI)
		Setting of battery save mode
		Setting of date
		Waiting for Bluetooth initialization completion
		(for models supporting Bluetooth)
		Update of DMI Wakeup factor, Update of SM-BIOS
		structure table
		PCI device configuration space close
		Cache control
		Process for CPU
		Make the CPU clock to be set by SETUP
		Waiting of motor-off completion of disabled HDD
		Final decision of USB FDD drive information
		Post processing of PRE_BOOT_SETUP
		Clear of PWRBTN_STS
		Enabling POWER Button
		Measure for chip set defective
F120h	Clear of IRT status
	Update of check sum of Runtime
	side
FFFFh	End

2-28 QOSMIO F10 Maintenance Manual (960-498)