Toshiba 960-498 manual Touch pad Replacement Procedures, Installing the touch pad

4.20 Touch pad 4 Replacement Procedures

Installing the touch pad

The following describes the procedure for installing the touch pad (See Figure 4-36).

NOTE: Do not reuse the touch pad so that it can not be used after peeling off from the computer. Be sure to stick a new touch pad.

1. Stick the touch pad and secure it with the following screws.

• M2.5⋅2.8B FLAT BIND screw x2

2. Install the touch pad plate and secure it with the following screws.

• M2.5⋅2.8B FLAT BIND screw x4

3.Connect the touch pad flat cable to the connector on the touch pad and secure it with a glass tape.

4-54 QOSMIO F10 Maintenance Manual (960-498)