Toshiba 960-498 manual Replacement Procedures Optical drive, Installing the optical drive

4 Replacement Procedures			4.7 Optical drive
3. Remove the following screws to remove the side bracket from the optical drive.
•	M2⋅3C	SUPER THIN HEAD screw	x2
•	M2⋅3.2	Stepping screw	x1

Side bracket

Stepping screw

M2⋅3C SUPER THIN HEAD

Figure 4-13 Disassembling the side bracket

Installing the optical drive

The following describes the procedure for installing the optical drive (See Figure 4-12 and 4-13).

1. Attach the side bracket to the optical drive and secure it with the following screws.

•	M2⋅3C	SUPER THIN HEAD screw	x2
•	M2⋅3.2	Stepping screw	x1

2.Insert the optical drive assembly into the slot for the drive and connect it to the connector CN1820 on the system board.

3.Secure the optical drive assembly from the bottom of the computer with the following screws.

• M2.5⋅4B FLAT BIND screw x2

QOSMIO F10 Maintenance Manual (960-498) 4-25