4 Replacement Procedures | 4.25 Hinge |
Installing the Hinge
The following describes the procedure for installing the hinge (See Figure
1.Install the hinges (middle frame side) on the back side of the middle frame and secure them with the following screws.
• M2.5⋅4B | FLAT BIND screw | x2 |
2.Install the hinges (display cover side) and secure them with the following screws after applying the locktight.
NOTE: Be sure to apply the locktight to the screws specified in the figure.
• M2.5⋅6B | FLAT BIND screw | x2 |
| (Locktight) |
|
3. Install the display cover and secure it with the following screws.
• M2.5⋅6 | PSP TIGHT screw | x4 |
QOSMIO F10 Maintenance Manual |
