2 Troubleshooting Procedures | 2.2 Troubleshooting Flowchart |
If the diagnostics program cannot detect an error, the problem may be intermittent. The Test program should be executed several times to isolate the problem. Check the Log Utilities function to confirm which diagnostic test detected an error(s), and perform the appropriate troubleshooting procedures as follows:
1.If an error is detected on the system test, memory test, display test, printer test, Async test, expansion test, real timer test, NDP test or Modem/LAN/Bluetooth/IEEE1394 test, perform the System Board Troubleshooting Procedures in Section 2.4.
2.If an error is detected on the floppy disk test, perform the USB FDD Troubleshooting Procedures in Section 2.5.
3.If an error is detected on the hard disk test, perform the HDD Troubleshooting Procedures in Section 2.6.
4.If an error is detected on the test for keyboard in ONLY ONE test program, perform the Keyboard Troubleshooting Procedures in Section 2.7.
5.If an error is detected on the test for touch pad in ONLY ONE test program, perform the Touch pad Troubleshooting Procedures in Section 2.8.
6.If an error is detected on the display test, perform the Display Troubleshooting Procedures in Section 2.9.
7.If an error is detected on the
8.If an error is detected on the Modem test, perform the Modem Troubleshooting Procedures in Section 2.11.
9.If an error is detected on the LAN test, perform the LAN Troubleshooting Procedures in Section 2.12.
10.If an error is detected on the Wireless LAN test, perform the Wireless LAN Troubleshooting Procedures in Section 2.13.
11.If an error is detected on the Sound test, perform the Sound Troubleshooting Procedures in Section 2.14.
12.If any trouble occurs on the TV tuner function, perform the TV tuner Troubleshooting Procedures in Section 2.15.
QOSMIO F10 Maintenance Manual |
