4.23 LCD unit/FL inverter | 4 Replacement Procedures |
9. Remove the following screws fixing the LCD unit.
• M2x4Z | SUPER THIN HEAD screw | x4 |
10.With the bottom edge of the LCD unit on the display cover, lift only the top edge of the LCD unit. After peeling off the aluminum tape, disconnect the LCD harness from the connector on the back of the LCD unit. Remove the LCD unit.
M2x4Z SUPER THIN HEAD
LCD unit
Aluminum tape (Fit the right side to the connector of the cable and the top to the connector on the board.)
LCD harness
Figure 4-41 Removing the LCD unit
QOSMIO F10 Maintenance Manual |