4 Replacement Procedures | 4.5 Keyboard/Bluetooth |
4.5Keyboard/Bluetooth
4.5.1 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the frame and do not touch the keytop.
1.Open the display.
2.Insert your finger into the spaces between the keyboard brace and the computer. Then, lift up the keyboard brace to unlatch and remove it.
3.Remove the following screw fixing the speaker cover assembly.
• M2.5⋅4B FLAT BIND screw | x1 |
4. Slide the speaker cover assembly to the arrow direction and pull up to remove.
Keyboard brace
M2.5x4B FLAT BIND
Speaker cover assembly
Figure 4-7 Removing the speaker cover assembly
QOSMIO F10 Maintenance Manual |
