Toshiba 960-498 manual RTC battery Replacement Procedures, Removing the RTC battery

4.13 RTC battery 4 Replacement Procedures

4.13RTC battery

Removing the RTC battery

The following describes the procedure for removing the RTC battery (See Figure 4-25).

1.Disconnect the RTC battery harness from the connector CN8490 on the system board.

2.Pull out the RTC battery harness from the guide and remove the RTC battery.

RTC battery

RTC battery harness

CN8490

Guide

Figure 4-25 Removing the RTC battery

Installing the RTC battery

The following describes the procedure for installing the RTC battery (See Figure 4-25).

1.Install the RTC battery and pass the RTC battery harness through the guide.

2.Connect the RTC battery harness to the connector CN8490 on the system board.

4-40 QOSMIO F10 Maintenance Manual (960-498)