3.31 SETUP | 3 Tests and Diagnostics |
This option is used to select the display when booting up.
LCD+AnalogRGB Selects both the internal LCD and the external monitor for simultaneous display.
NOTE: When starting the computer in Standby or hibernation mode, the last configuration is remembered. If data does not appear on the display you are using after starting in Standby or hibernation mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal LCD, the external monitor, both the internal LCD and the external monitor and TV display.
You cannot select TV display in HW Setup. To display on a TV screen, use Fn+F5.
When an external monitor, which does not support SVGA mode is connected and “LCD+AnalogRGB” is selected, the external display is not displayed.
(b)LCD Display Stretch
When LCD Display Stretch is enabled, it is possible to stretch the picture in small resolution mode.
Enabled | Enables the LCD display stretch feature. (Default) |
Disabled | Disables the LCD display stretch feature. |
(c)TV Type
This option allows you to select the type of TV.
NTSC (Japan) | TV in Japanese system | |
NTSC (US) | TV in the U.S. system | |
PAL | TV in Europe and China system | |
525p | (480p,D2) | High Definition Television with 480 progressive scan |
750p | (720p,D4) | High Definition Television with 720 progressive scan |
1125i | (1080i,D3) | High Definition Television with 1080 interlace |
525i | (480i,D1) | High Definition Television with 480 interlace |
PAL | (SCART) | TV in Europe system |
QOSMIO F10 Maintenance Manual |
