Section 4 - Lubrication & Maintenance
As Required
Operation 66
Road lights - High/Low Beam Bulb Replacement
To replace a road light bulb, remove the two screws
(1)retaining the lamp unit to the body work and withdraw the lamp unit.. Unplug the connector (2) and remove the rubber cover (3).. Remove the bulb (4) by releasing the spring clip (5).. Replace the bulb using the reverse procedure taking care not to touch the new bulb glass..
Replacement bulb, P/N: 9626307
5 | 5 | 2 |
3
4
| 1 | |
|
| |
Operation 67 |
| 9 |
Work Lights Bulb Replacement |
| |
|
| |
To replace a work light bulb, remove the two screws |
|
|
(6) retaining the surround (7) and lift the lamp unit |
|
|
(8) away from the casing.. Release the spring clip (9) |
|
|
and remove the bulb (10) from the lamp unit.. Unplug |
| 11 |
the connector (11).. Replace the bulb using the reverse |
| |
| 10 | |
procedure taking care not to touch the bulb glass.. |
| 9 |
Replacement bulb, P/N: 9703399 |
| |
7 | 8 | |
|
|
Replacement bulbs can be purchased from your | 6 |
Buhler Versatile dealer.. |
435/485/535