Electronic Instrument Cluster - EIC
Transmission Gear Shift Position Display
The top LCD provides a display of the gear selected.. The left figure (1) displays a letter as follows:
F - Forward gear selected* N - Neutral selected
R - Reverse gear selected*
A - Automatic shift selected (Powershift option only) P - Parking brake applied*
CL - Clutch depressed* (Synchromesh only)
The right figure (2) displays gear
*If the letter “P” is flashing, the display is indicating an “Operator Prompt” where the parking brake is inappropriately on or off or out of sequence with the transmission control lever.. To return to normal operation, release or apply the parking brake as appropriate.. Return the transmission control lever to neutral, release the parking brake, then shift to either forward or reverse as desired..
NOTE: A tractor equipped with synchromesh transmission will only display gear shift position when moving.
Engine Speed Display
With the engine running, the digital value (3) of the engine RPM will be displayed, together with the RPM legend (4) in the center LCD..
The engine LCD registers in increments of 10 RPM..
If a critical engine or driveline fault should occur, the word “STOP” will flash for 30 seconds before automatic engine shut down occurs..
1 2
3
4
435/485/535