4-51 Section 4 - Lubrication & Maintenance

Indicated by Warning Light

Clean the air cleaner body with a lint-free towel before installing the element..

Inspect the element seal (1) before installing.. Cracks or chips in the element sealing rubber indicates a new element must be installed..

Install the air filter back into the canister.. Be sure the seal on the end of the filter fully contacts the air cleaner body.. The wing nut (2) has a small seal (3) on the inner face, and the seal should be in good condition before the wing nut is tightened.. If the seal is damaged on the wing nut, replace it.. Tighten the nut securely..

1

F4-58

2

3

F4-54

435/485/535