JL Audio SB-GM-SLVEXT2/10W1v2/DG, C5-570x warranty I n s t a l l a t i o n G u i d e, for the

SB-GM-SLVEXT2/10W1v2 INSTR_SKU# 011300

I n s t a l l a t i o n G u i d e

for the

SB-GM-SLVEXT2/10W1v2

SKU#94465,94467,94468,94469,94470,94472

2007+

If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox® be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems:

1)The sub-bass performance will suffer due to the movement of the enclosure caused by the force exerted by the woofer(s).

2)A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.

INSTALLATION D I F F I C U LT Y :

2OUT OF

5

Estimated TIME:

1 HOUR

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper

installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

S T E P 1

Empty out the area under the back seat so that you have a

Clean area to work in.

S T E P 2

Measure 14” in from the insdie of the rear sill trim as shown, this should be the center of the 3” x 3” Wax Square.

14”

S T E P 3

Thread the Mounting Stud into the bottom of the

Stealthbox® so that only 1/4”- 3/8” is exposed.

Continued on Next Page