Main Specifications
• Rated Power Output
100 W x 2 (stereo, 8 ohms load, 1 kHz, 0.1 % or less THD)
150 W x 2 (stereo, 4 ohms load, 1 kHz, 0.1 % or less THD)
300 W (BTL, 8 ohms load, 1 kHz, 0.5 % or less THD)
• Frequency Response
20 Hz to 50 kHz (+0/- 1 dB, 1 W/8 ohms)
•Input Impedance
Balanced Input: 10 k ohms
Unbalanced Input: 10 k ohms
•Input Sensitivity
•
+24 dBm
•Recommended Load Impedance
4 ohms or greater (stereo)
8 ohms or greater (BTL)
•Power Band Width
20 Hz to 20 kHz (stereo, 8 ohms load, 50 W, 0.2 % or less THD)
20 Hz to 20 kHz (BTL, 8 ohms load, 150 W, 0.2 % or less THD)
• Total Harmonic Distortion
0.05% or less (stereo, 8 ohms load, 1 kHz, 50 W)
0.05% or less (stereo, 4 ohms load, 1 kHz, 75 W)
0.07% or less (BTL, 8 ohms load, 1 kHz, 150 W)
• S/N Ratio
100 dB or greater (input terminate with 150 ohms, input sensitivity +4 dBm,
• Damping Factor
125 or greater (8 ohms load, 1 kHz)
• Channel Separation
65 dB or greater (8 ohms load, 1 kHz, 50 W, DIN audio weighted)
• Slew Rate
11 V/micro sec or greater (stereo, 8 ohms load)
•Controls
Attenuators x 2 (A, B) Power Switch
MODE Switch (STEREO/BTL)
INPUT LEVEL Switch (+4
•Indicators
Power Indicator
Clip Indicators (A, B)
Level Indicators (A, B)
Protection Indicator
• Connectors
Balanced Input Jacks (1/4 inch TRS phone type) x 2 (A, B)
Balanced Input Connectors
Speaker Terminals (Binding Posts) x 2 (A, B)
• Power Supply
AC 117/230/240 V (50/60 Hz)
•Power Consumption
130 W (AC 117/230/240 V)
•Dimensions
482 (W) x 364 (D) x 48.6 (H) mm
19 (W) x
• Weight
5.0 kg/11 lbs 1 oz
•Accessories
Owner's Manual Rubber Feet x 4
0 dBm = 0.775 V rms
*In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
15
