IKELITE VIDEO CASE

SUPPLEMENTAL INSTRUCTIONS FOR

#6038.91Sony HDR SR5

Thissupplementalsetofinstructionsdescribesadditionalfeaturesspecific toyourhousingmodel.Priortotestingthesysteminthewater,pleaseread thissupplementalongwiththegeneralinstructionmanualtobecomefamiliar withitsfeaturesandfunctions.

IkeliteVideoCasesareslightlynegativeinsaltwaterforstability.This housinghasbeenwaterpressuretestedatthefactoryandhasaworking depthof60m(200').

HOUSING CONTROLS________________

 

Power

Power Zoom

Lid Snap

• Power On/Off / Mode

 

 

• Start/Stop

Port

Touch

• Snap Shot

Mirror

Pad

• Power Zoom

 

 

• Photo

 

T. P.

• LCD Screen Control #1

 

Bottom Bar

• LCD Screen Control #2

 

 

• LCD Screen Control #3

Base

 

• LCD Reversing Circuit On/Off

 

 

• Display Batt Info

Snap Shot

for Reverse

• Touch Pad Controls

 

 

On/Off

 

 

Circuit

MAIN O-RING #0109_________________

Stop

 

O-rings last several y ears if properly

Start/

 

 

 

maintained. Control seals sh ould not need to

 

 

be replaced as long as the control shafts are

 

 

kept clean and lightl y lubricated.

 

 

P R E P A R A T IO N

 

 

PACKAGED WITH HOUSING__________________________________________________

• External UR/Pro Color Filter

 

 

• Internal Lens Shade

 

 

• Silicone Lubricant

 

 

COLOR FILTER_____________________________________

 

 

The installation and usage of the external UR/Pro

 

 

color filter is described in the general instruction manual.

 

 

LENS SHADE_______________________________________

 

 

The internal lens shade helps block light reflection/

 

 

refraction caused by the interaction of the external color

 

 

filter and the port.

External

Internal

Carefully thread the lens shade on the front of the

Color Filter

Lens Shade

camera lens. The lens threads are very fine; DO NOT cross thread. It should screw on very easily. If it is difficult to turn, you are cross threading.

Completely thread the lens shade into the camera to avoid any p otential clearance or sealing problems when the camera is in stalled and the housing is se aled.

LCD MONITOR / EXTERNAL MIRROR_________________________________________

The camera's LCD monitor can be viewed from the rear of th e housing, using th e external mirror featured on the side of the housing.

Open the LCD monitor on the camera, rotate 180°, and then press it back against the side of the camera. The external mirror is hinged so that it can be opened to reflect the image from the camera's LCD monitor for viewing from the rear of the housing.

During transportation, please remember to close the mirror by pressing it aga inst the side of the housing or lid snap.

BATTERY AND TAPE__________________________________________________________

Install a fully charged Sony battery on the camera:

Sony NP-FH50, NP-FH60, NP-FH70

Other brand batteries may not fit inside the housing.

Make sure you have loaded an appropriate digital cassette tape in the camera. OPTIONAL WIDE ANGLE LENS_______________________________________________

The housing’s port accepts optional 67mm threaded waterproof Wide-Angle lenses such as the Ikelite #6420 W-20, Epoque DCL-20 and Inon UWL-100 Type 2. These waterproof lenses secure to the outside of the lens port.

Should you elect to use an optional waterproof lens, carefully thread the lens on the front of the lens port on the housing. The lens threads are very fine; DO NOT cross thread. It should screw on very easily. If it is difficult to turn, you are cross threading. INTERNAL WIDE-ANGLE LENS OPTION ________________________________________

Special ports are available for use with the Raynox HD -5050 Pro high definition wide-angle lens. optional ports sold separately as dome port #9304 or f lat lens port #9304.1.Raynox HD-5050 Pro lens not included. Lens not available for purchase through Ikelite.

Page 1
Image 1
Ikelite instruction manual Ikelite Video Case, E P a R a T IO N, #6038.91Sony HDR SR5, Main O-RING #0109