Ikelite Digital Housing
i n s t r u c t i o n m a n u a l
#6132.50 for Olympus
Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 30 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.
The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory. Housing is pressure tested to 200’ (60m).
Shutter
Release
|
|
|
| Lens Port |
|
|
|
| ||
|
|
|
|
| ||||||
Lid |
|
|
|
|
|
|
|
| ||
|
|
|
| Lid | ||||||
Snap |
|
|
| Snap | ||||||
Aluminum Tray
FRONT VIEW
Lens Port
Shutter
Release
| Zoom | |
AEL | Mode | |
Power | ||
|
TOP VIEW
Quick
Release
Button
Lid
Snap
Rubber
Handles
Monitor
Flash
Display
Quick View
Arrow Pad
Shutter
Release
Flash
Mode
Lid
Snap
Lubricants
1. Ikelite provides silicone lubricant with the housing. We recommend you use only Ikelite lubricant on Ikelite products as some other brands may cause the o’ring to swell and not seal properly.
2. Use only enough lubricant to lightly cover control shafts and o’rings. Wipe off any excess lubricant with a clean cloth. Lubricant is not a sealant, it is used to reduce friction. Excessive lubricant can collect sand and dirt which may interfere with proper sealing.
CAUTION
Never use spray lubricants as the propellant ingredient can cause the plastic housing to crack.
BACK VIEW
2 | 3 |
