Nuvo NV-A4DS-UK installation manual System, Ir Out, All Port Connection, 56KHz, 38KHz

The fixed lineout can be used for zones where it is more appropriate to have a separate volume control from the NuVo keypad for the external amplifier, fig. 10. A good example of this use would be an outdoor zone that is being used in conjunction with zone 4. All three versions, zone 4 amplified output, variable lineout, and fixed lineout can be used simultaneously.

Fig. 10

VOLUME

MUTE

MP3	CD
SAT	HD

The additional speakers from zone 4 are
controlled by a separate volume control.					NuVo Technologies Cincinnati Ohio. USA
					MODEL NV-P2100
					HIGH EFFICIENCY 200 WATT
					STEREO AMPLIFIER
					120V 60HZ 250 WATTS
Diagram shown using the NuVo P2100	AUDIO			CONTROL	USE ONLY WITH 250V FUSE
					SPEAKER
	L	SENSITIVITY		POWER VOLTAGE UNIT	OUTPUT POWER
		OdBV = 1.0RMS
				MODE TRIGGER ON	8 OHM: 70W X 2
	INPUT	LEFT	RIGHT	ON/OFF SWITCH 3-30 VOLTS +12VDC	4 OHM: 100W X 2
				AUDIO AC/DC AC OR DC 100mA
	2	0	0
	R	-12		-12
	+6		+6
	INPUT OUTPUT

1	2	3	4	ZONE 4		38KHz
L			L	L		1	3
R			R	R		2	4
				FIXED	VAR	NORMAL
						USE
	SOURCE INPUT			LINE OUT		IR OUT

56KHz

			Simplese		D
1	ON=+5V	LINK			FOUR-SOURCE FOUR-ZONE
	STATUS
			SPEAKER AND DATA SIGNALS	100~240V	50~60Hz 85W
				NuVo Technologies Cincinnati Ohio USA
2	MUTE	RS232
	=0V

USE FOR SAT

OR CABLE

SYSTEM A N

INTE RTEK

CM

CONFORMS TO

UL STD.6500

CERTIFIED TO

C US CAN/CSA STD.E60065

3033118

TERTE

K

VIII. Using the Link Jack to Create Eight Zones

Two separate Simplese Systems can be made to react as one using the back-panel 3.5mm connection labeled LINK. This requires the use of “Y” cables to link the source inputs and IR outputs. A single stereo mini-patch cable is then plugged into the LINK jack on both Simplese amplifiers. This links the All Off command so when it is initiated at any of the zone keypads, all eight zones will turn off, fig. 11

	38KHz
	1	3
Fig. 11	2	4
	NORMAL
	USE

IR OUT

56KHz

1	ON=+12V	LINK	Simplese
	STATUS
			SPEAKER AND DATA SIGNALS
2	MUTE	RS232
	=0V

USE FOR SAT

OR CABLE

SYSTEM ALL PORT CONNECTION

38KHz

1 3

2 4

NORMAL

USE

IR OUT

56KHz

1	ON=+12V	LINK	Simplese
	STATUS
			SPEAKER AND DATA SIGNALS
2	MUTE	RS232
	=0V

USE FOR SAT

OR CABLE

SYSTEM ALL PORT CONNECTION

14