EQ Control and Source Grouping
The keypads can be used to set specific zone functions. These are for bass and treble EQ response and source grouping. To change bass response, press the Mute button and Source 1 button simultaneously. Adjust the bass level up or down by using the Volume Up and Volume Down buttons. The volume indicator LEDs will indicate the output level, fig. 7. Adjust treble response using the same process. This is accessed by pressing the Mute and Source 2 buttons. Once the desired setting is made, press the Source button again to return the keypad to normal operation.
Source grouping is a feature that allows multiple zones in an open living space to always share the same source selection but still retain individual volume and on/off control. This is achieved by pressing Mute and Source 3. Volume Up enables the group function, and Volume
The lit volume LED indicates the treble and bass levels.
Press the Mute and Source 1 for bass control and Mute and Source 2 for treble control.
VOLUME
MUTE
MP3CD
SATHD
Down disables the group function and causes the keypad to operate independently of all other groups, fig. 8.
Fig. 7 | FLAT | +4 dB | |
|
| ||
|
| +6 dB | |
|
| +8 dB |
Volume Reset
The Simplese System keypads automatically reset the listening volume to a low level when all zones have been turned off and a zone is turned on again. If a zone is turned off and turned back on before all the zones are turned off, it will return at the previous volume level.
All Off
All the zones in the system can be turned off simultaneously from any keypad by pushing and holding the power button until the keypad goes completely dark. A single push and release of the power button will only turn that zone off. If another zone is on, the power button will remain lit.
VOLUME
Fig. 8
Group Disabled | Group Enabled |
VOLUME
11
