iLive IH818B instruction manual Audio, Misc, The DVD Setup Menu, Video Out, Digital Output

The DVD Setup Menu

Video

Aspect Ratio The ratio of the width of an image to its height.

•4:3PS The 4:3PS (Pan & Scan) ratio shows the DVD movie in full screen, but the sides of the movie are cut away so that it fits on a standard TV screen

•4:3LB The 4:3LB (Letterbox) ratio shows the DVD movie in a original format, but with black bars at the top and bottom so that it fits on a standard TV screen.

•16:9 The 16:9 ratio shows the DVD movie in its widescreen format. Use this setting when viewing a movie on a widescreen TV.

TV System Select the TV system that’s consistent with the connected television. NTSC is the standard TV System setting for the U.S.A., Canada, and Mexico.

Video Out

•S-VideoSelect the S-Video option to use the S-Video Output as the unit’s primary video output.

•Component The Setting is an advanced setting that takes advantage of the Composite Video Outputs.

•P-Scan (Component Video Out The P-Scan (Progressive Scan) setting is an advanced setting that takes advantage of the Component Video Outputs, and produces a higher quality image output.

•Press the Video button on the remote control to cycle through S-Video, YUV, and P-Scan.

Audio

Digital Output

•Off The Off setting is used when the Digital Audio Output is disconnected.

•PCM The Digital Audio Output must be connected to a surround sound receiver to fully take advantage of this feature.

•RAW The RAW setting will automatically enable PCM in circumstances where it can be used, and automatically disable it when it cannot be used. Like PCM, this option also requires the Digital Audio Output to be connected to a surround sound receiver.

Misc

Use Default Settings The Use Default Settings button will change all settings back to the original factory defaults.

Screen Saver The Screen Saver should be turned on to avoid burn-in on the television.