Docking an iPod
1.Locate the numbered Bracket that fits the iPod that will be docked.
Each included Bracket has a number on it, indicating which iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.
2. Snap the Bracket into place over the iPod connector in the Docking Station.
All Brackets will only fit one way onto the Dock.
When inserting an iPod nano (first or second generation), slide the Dock connection on the unit so that it matches the opening on the iPod nano (first or second generation).
3.Connect the iPod to the iPod connector inside the Docking Station.
Once an iPod is connected to the Docking Station, the unit will charge the docked iPod.
Playing an iPod
1.Dock an iPod onto the unit by following the “Docking an iPod” instructions on page 6.
2.Press the Power/Alarm Off Button to turn the unit on.
3.Press the iPod Button to switch the unit to iPod mode.
4.Press the Play/Pause/Preset + Button to begin playing a docked iPod.
5.Press the Skip/Search Buttons to skip through songs on a docked iPod. Press and hold the Skip/Search Buttons to search through an individual song on a docked iPod.
4/7/008 10:41: AM
