OPERATIONS
Docking an iPod
1.Locate the numbered bracket that fits the iPod that will be docked.
Each included Bracket has a number on it, indicating which iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.
2.Snap the bracket into place over the iPod connector in the Dock for iPod.
3.Connect the iPod to the iPod connector.
When the unit is plugged in, using AC power, the docked iPod will charge.
Playing a Docked iPod
Note: The wireless speakers need to be paired with the unit before any audio can be heard. See page 9 for wireless speaker pairing instructions.
1.Press the Power button to turn the base station on.
2.Press the Source button to switch to iPod mode.
3.Press the Play/Pause button to play or pause the docked iPod.
Left / Right / Mono Speaker Settings
The wireless speakers can be set to Left, Right, or Mono by using the Left/Right/Mono dial on the wireless speaker.
When placing multiple wireless speakers in close proximity to one another, set half of the speakers to Left and the other half to Right. This will create a stereo audio output.
When a single wireless speaker is set in a location, adjust the Left/Right/Mono dial to Mono.
Resetting the Unit
Resetting the base station is the quickest and most effective way to solve small unexpected problems with the base station’s behavior.
1.Using a paperclip or like object, press the Reset button to reset the base station to it’s original settings.
Please note, resetting the base station will not unpair any of the wireless speakers from the bast station.
CUSTOMER HELPLINE | iLive IS809B 11 |
