iLive IS809B Operations, Setting the Clock, Setting the Sleep Timer, Using the Auxiliary Input

OPERATIONS

Setting the Clock

1.Press and hold the Time Set button.

2.While holding the Time Set button, press the Skip/Search buttons to adjust the hour and minute.

3.Release the Time Set button to set the adjusted time.

Setting the Sleep Timer

1.Press the Sleep button repeatedly to adjust the sleep timer between 60 and 10 minutes, in 10 minute increments.

When the set amount of time has expired, the unit will power off.

Using the Auxiliary Input

Note: The speakers need to be paired with the unit before any audio can be heard.

1.Connect a mini-phono 3.5mm cable (not included) or a mini-phono 3.5mm cable-RCA R/L audio cable (not included) to the Auxiliary Input on the unit and the audio output/ headphone jack on an MP3 player, television, or stereo system.

2.Turn the unit on by pressing the Power button.

3.Press the Source button to switch the unit to

Auxiliary mode.

4.Audio played through the connected MP3 player, television, or stereo system will now be heard through the unit.

Audio Source	Required Connector
MP3 Player	mini-phono 3.5mm Cable (not
	included)
Television	mini-phono 3.5mm Cable -
	RCA R/L Audio Cable (not
	included)
Stereo System	mini-phono 3.5mm Cable -
	RCA R/L Audio Cable (not
	included)

Setting the Timer

1.Press and hold the Timer button.

2.While holding the Timer button, press the Skip/Search buttons to adjust the hour and minute.

3.Release the Timer button to set the adjusted timer.

4.Press the Source button to select iPod or Auxiliary mode.

An iPod must be docked, or an audio source must be connected to the Auxiliary input when the set time is reached. Otherwise, no audio will play when the set time is reached.

5.Press the Power button to turn the unit off.

6.Press the Timer button to activate the set timer.

“Timer On” will appear on the LCD display when the timer is activated.

After the set time is reached, the base station will power on.

IMPORTANT: The wireless speakers must be powered on manually before the set time is reached. The timer will not power on the paired wireless speakers.

Using the Wireless Remote

The included remote is wireless and does not require line-of-sight to control the unit.

The wireless remote can control the base station from approximately half the distance of the speaker reception. (Approximately 100ft line-of- sight, or 45ft indoors)

Results will vary depending on the number and size of obstructions between the base station and the wireless remote.

The Volume buttons on the remote control will adjust the master volume of the base station, affecting all linked speakers.

The included speakers have independent volume controls that can be used to fine tune the volume of the individual speakers.

10 iLive IS809B