iLive | ITP280B10
iPhone/iPod and radio
1 Press the PoWer button to turn the bar
speaker on.
2 Press the source button to switch to
iPhone/iPod mode. (iPod button on the
remote)
3 Press the iPod draWer button to open the
MOTORIZED DOCK FOR iPhone/iPod.
4 Locate the numbered bracket that ts the
iPhone/iPod model that will be docked.
Each included bracket has a number on it,
indicating which iPhone/iPod model that
bracket is compatible with. See the separate
bracket chart page to identify which bracket
is needed.
5 Snap the bracket into place over the
iPhone/iPod connector in the motorized
dock.
6 Connect the iPhone or iPod to the
connector inside the Dock for iPhone/iPod.
When the speaker is plugged in, using AC
power, the docked iPhone or iPod will charge.
1 Press the PoWer button to turn the bar
speaker on.
2 Press the source button to switch to FM
radio mode.
3 Press the skiP/tune buttons on the
remote to tune the FM radio.
1 Follow the instructions for TUNING THE FM
RADIO.
2 Press the MeM button.
3 Press the Menu uP/doWn for iPod
buttons to select a preset. (P01, P02, P03,
etc.)
4 After you’ve selected a preset, press the
MeM button to save the current FM radio
station to the selected preset.
1 Follow the instructions for TUNING THE FM
RADIO.
2 Follow the instructions for SAVING A
STATION AS A PRESET.
3 Press the MeMory buttons on the remote
to cycle through preset radio stations.
docking an iPhone/iPod tuning the fM radio
saving a station as a Preset
tuning to a Preset fM radio station
Playing an iPhone/iPod
1 Follow the instructions for docking an
iPhone/iPod.
2 Press the PLay/Pause button to begin
playing music from the docked iPhone or
iPod.