Ear Clip Headset w/ Bluetooth wireless technology | V10M10_IM_EN_11082006 |
OPERATING INSTRUCTIONS
Pairing i202 with the Included Wireless Audio Transmitter (Dongle)
The i202 can be used with an audio device that is not designed to support Bluetooth wireless technology using the supplied wireless audio transmitter (dongle). In order to answer and place phone calls while using the dongle, it is important to pair the mobile phone first. After pairing the mobile phone according to the
1.Set the i202 into pairing mode following instructions 1 and 2 on the previous page.
2.Press and hold the On/Off button on the dongle for approximately five (5) seconds.
3.Blue and red alternating lights will blink around the On/Off button indicating that the dongle is now in pairing mode.
4. Place the headset near the dongle when both are in pairing mode.
6.Plug the 3.5mm end of the dongle into the headphone jack of an audio device and enjoy music playback wirelessly through the i202 stereo headphones.
Note: Only the volume can be controlled on the i202 when using the dongle. All other functions (skip, stop, forward, etc.) must be controlled using the controls on the audio device itself.
5.When the alternating red and blue blinking lights on both devices change to a blue blinking light ONLY, pairing is complete.
- 11 - |
