46.Remove the 3/8” Nylon Locknut (50) from the indi- cated 3/8” x 5 1/2” Bolt (55).
Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24). Secure the Pulley and a Cable Trap (25) to the 3/8” x 5 1/2” Bolt (55) on the indicated side of the Press Base (6) with the 3/8” Nylon Locknut (50). Be sure the Cable Trap is oriented to hold the Cable in place.
Press a 2 1/2” Square Inner Cap (76) into the Press Base (6).
47.Remove the 3/8” Nylon Jamnut (63) from the indi- cated 3/8” x 4 3/4” Bolt (60).
Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24) in the direction shown. Secure the Pulley and a Cable Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indicated side of the Press Leg Lever (90) with the 3/8” Nylon Jamnut (63). Be sure the Cable Trap is oriented to hold the Cable in place.
48.Remove the indicated 3/8” Nylon Locknuts (50).
Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indicated side of the Press Seat Frame (7) with the first 3/8” Nylon Locknut (50).
Wrap the Leg Press Cable (75) around another
3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indi- cated side of the Press Frame (8) with the other 3/8” Nylon Locknut (50).
Be sure the Cable Traps (25) are oriented to hold the Leg Press Cable (75) in place.
49.Remove the indicated 3/8” Nylon Locknut (50).
Attach the Leg Press Cable (75) to the 3/8” x 3 1/4” Bolt (62) on the indicated side of the Press Upright
(2) with the 3/8” Nylon Locknut (50).
18
46 |
|
|
| 76 |
|
|
| 24 |
| 55 |
|
6 | 25 |
|
| 50 | |
| 75 | |
47 |
|
|
60 |
|
|
90 |
| 75 |
|
| |
| 25 | 63 |
| 24 | |
|
| |
48 | 7 |
|
|
| |
| 60 | 25 |
|
| 24 |
| 25 | 50 |
|
| |
| 24 | 75 |
| 8 |
|
49 |
|
|
| 2 |
|
|
| 62 |
|
| 50 |
|
| 75 |
