15.Press a 50mm Square Outer Cap (17) onto each end of the Small Stabilizer (25).
Attach the Small Stabilizer (25) to the Bench Frame
(5) with two M10 x 65mm Carriage Bolts (40) and two M10 Nylon Locknuts (11). Note: There is an inden- tation around the holes on one side of the Small Stabilizer. This side must be facing the floor.
16.Press a 50mm x 70mm Outer Cap (10) onto each end of the Large Stabilizer (26).
Turn the Large Stabilizer (26) so the warning decal is in the position shown. Attach the Large Stabilizer to the Bench Frame (5) with two M10 x 65mm Carriage Bolts (40) and two M10 Nylon Locknuts (11). Note:
There is an indentation around the holes on one side of the Large Stabilizer. This side must be fac- ing the floor.
17.Press two 20mm x 40mm Inner Caps (28) into each Backrest Tube (27). Press four 20mm x 40mm Inner Caps into the Backrest Adjustment Bracket (36).
Lubricate an M10 x 180mm Bolt (22). Attach the Backrest Tubes (27) to the welded tube on the Backrest Adjustment Bracket (36) with the Bolt, two M10 Washers (6), and an M10 Nylon Locknut (11).
Make sure that the Backrest Tubes are turned as shown. The indicated holes are not centered in the Backrest Tubes but are closer to one side. Turn the Backrest Tubes so the holes are closer to the floor. Do not over tighten the Nylon Locknut; the Backrest Tubes must pivot easily.
18.Lubricate an M10 x 115mm Bolt (55). Slide an M10 Washer (6) onto the Bolt. Hold the hole in the Backrest Adjustment Bracket (36) on the outside of the bracket on the Bench Frame (5).
Inserting the M10 x 115mm Bolt (55) through the one side of the Backrest Adjustment Bracket, one side of the bracket on the Bench Frame, and through the 15mm x 10.2mm x 60mm Spacer (57). Then, insert the Bolt through the other side of the bracket on the Bench Frame and the Backrest Adjustment Bracket. Secure the Bolt with an M10 Washer (6) and an M10 Nylon Locknut (11). Do not over tighten the Nylon
Locknut.
15 |
|
|
|
| 11 | 5 |
|
| 17 |
| |
|
|
| |
|
|
| 25 |
| 40 |
| 17 |
|
|
| |
16 |
|
|
|
| 5 |
| 11 |
|
|
| |
| 10 |
| Decal |
|
| 26 | 10 |
|
|
| |
|
|
| 40 |
17 | Lubricate | 27 | 28 |
22 | 6 |
|
|
Holes |
|
| 6 |
|
|
| |
|
|
| 11 |
28 |
|
| |
| 28 |
|
|
| Welded |
| 28 |
| 36 |
| |
| Tube |
| |
|
|
| |
18 |
| 27 |
|
|
|
| |
55 | Lubricate |
|
|
|
|
| |
|
|
| 36 |
|
|
| Hole |
|
| 57 | 6 |
|
| 11 | |
| 6 |
| |
|
|
| |
| 5 | Bracket |
|
|
|
| |
11
