ATTACHING WEIGHTS TO THE BARBELL OR THE WEIGHT CARRIAGE

To use the Barbell (35), slide the desired amount of weight (not included) onto each end of the Barbell. Secure the weights with Weight Clips (51).

Weights can be attached to the weight tube on the Weight Carriage (22) in the same manner.

WARNING: Do not place more than 300 pounds on the Barbell (35), or more than 150 pounds on the Weight Carriage (22). Always place the same amount of weight on each side of the Barbell or the Weight Carriage. Always secure weights with Weight Clips (51).

TIGHTENING THE CABLES

Woven cable, the type of cable used on the weight rack, can stretch slightly when it is first used. If the cables need to be tightened, remove the M10 Nylon Locknut (11) and the M10 x 45mm Bolt (40) from the lower ends of the Pulley Plates (19). Reattach the Pulley (5) and Cable Trap (21) to the next higher hole in the Pulley Plates. Make sure the Cable Trap holds the Low Cable (8) in the groove of the Pulley. Repeat until the cables are properly tightened. Do not over- tighten the Nylon Locknut; the Pulley must be able to turn freely.

USING OLYMPIC WEIGHTS ON THE LEG LEVER

To use Olympic weights on the Leg Lever (70), insert the Weight Adapter Bushings (46) into the ends of the Bench Weight Adapter (42). Slide the Bench Weight Adapter over the weight tube on the Leg Lever. Insert the Pin (52) into the weight tube.

ADJUSTING THE SEAT

To raise the Seat (67), lift the narrow end of the Seat until the appropriate tab on the Seat Adjustment Bracket (84) engages the welded pin (not shown) on the right side of the Bench Frame (61).

To lower the Seat (67), use the handle on the Seat Adjustment Bracket (84) to disengage the Seat Adjustment Bracket from the pin on the right side of the Bench Frame (61). Lower the Seat to the desired position and engage the appropriate tab on the Seat Adjustment Bracket to the pin.

 

 

Weights

 

35

 

 

 

 

 

51

 

22

 

 

 

 

19

 

 

11

40

 

 

 

 

 

5

21

 

 

 

 

 

8

 

 

70

 

 

 

42

52

 

 

46

 

 

 

 

 

Handle

84

 

67

 

 

 

 

Pin

 

 

 

 

61

16

Page 15 Page 17
Page 16
Image 16
Image IMBE53910 Attaching Weights to the Barbell or the Weight Carriage, Tightening the Cables, Adjusting the Seat
Page 15 Page 17

IMBE53910 specifications

The Image IMBE53910 is an advanced camera module designed for demanding imaging applications. This compact yet powerful device is primarily aimed at embedded systems, robotics, and areas requiring high fidelity imaging in a small form factor. Built to meet the needs of modern technology while providing exceptional performance, the IMBE53910 incorporates a variety of features and technologies that enhance its functionality.

One of the standout features of the IMBE53910 is its high-resolution imaging capability. With a resolution of up to 5 megapixels, this camera module provides crisp and detailed images that are essential for applications such as machine vision and surveillance. The advanced optics integrated within the design ensure sharp focus and vibrant color reproduction, making it suitable for live video streaming and high-definition photography.

The IMBE53910 utilizes a state-of-the-art CMOS sensor, benefiting from low power consumption characteristics while maintaining high-quality image output. This technology not only reduces the energy requirements of devices using this module but also allows for longer operational times, making it ideal for battery-powered applications.

In terms of connectivity, the IMBE53910 offers flexible interface options. With support for various communication protocols, including USB, SPI, and I2C, it can easily integrate into a diverse range of systems. This versatility is a significant advantage, allowing engineers and developers to incorporate the IMBE53910 into both existing and new projects without extensive modifications.

Moreover, the camera module is equipped with advanced image processing capabilities. Features such as automatic white balance, exposure control, and image enhancement algorithms help optimize captured images in real-time, allowing for superior performance under varying lighting conditions. These intelligent algorithms contribute to the overall ease of use, enabling quick setup and operation.

Robust housing ensures durability and protection for the internal components, making the IMBE53910 suitable for use in challenging environments. This resilience extends the operational lifespan of the camera, an essential factor for applications in industrial and outdoor settings.

Overall, the Image IMBE53910 is a feature-rich camera solution that caters to various imaging needs, providing high resolution and advanced processing technologies in a compact format. Its blend of performance, versatility, and durability makes it a top choice for engineers and developers in the field of imaging technology.
Top Page Image Contents