4
ASSEMBLYAssembly requires two persons. Place all parts of the recumbent cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench .
PART CHART
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PARTLIST on page 14. The second number refers
to the quantity used in assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-assembled.
M8 x 70mm Carriage Bolt (72)Ð2
Console Screw (20)Ð8
M8 Nylon Locknut (56)Ð8 M8 Curved Washer (28)Ð7
M8 x 80mm Carriage Bolt (63)Ð2
M8 Black Flat Washer (57)Ð16
M8 x 35mm Carriage Bolt (7)Ð4
M6 x 38mm Hex Screw (73)Ð4
M6 x 15mm Hex Screw (29)Ð4
M8 x 15mm Button Screw (74)Ð4
M8 x 45mm Button Screw (17)Ð3