HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 19.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.

Plug the adapter into the AUDIO OUT jack on your VCR.

A

HOW TO USE AN IFIT.COM CD OR VIDEO PROGRAM

To use iFIT.com CDs or videocassettes, the treadmill must be connected to your portable CD player, portable stereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER on pages 18 to 20. To purchase iFIT.com CDs or videocas- settes, call the toll-free telephone number on the front cover of this manual.

Follow the steps below to use an iFIT.com CD or video program.

VIDEOINAUDIO

ANT. IN

3CH 4 RF OUT

OUT

AUDIO OUT

RIGHT

LEFT

Audio Adapter

Cable

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.

Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

B

VIDEOINAUDIO

 

ANT. IN

 

OUT

3CH 4

RF OUT

Audio

RCA Y-adapter

Cable

Adapter

 

 

Wire removed from

 

 

AUDIO OUT jack

 

 

20

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 11.

Select the iFIT.com mode.

To select the iFIT.com mode, press the Program Select button repeatedly

until a track and the letters “iFIT” appear in the dis- play.

Insert the iFIT.com CD or videocassette.

If you are using an iFIT.com CD, insert the CD into your CD player. If you are using an iFIT.com videocassette, insert the videocassette into your VCR.

Press the PLAY button on your CD player or VCR.

A moment after the button is pressed, your per- sonal trainer will begin guiding you through your workout. Simply follow your personal trainerʼs instructions. Note: If the time is flashing in the dis- play, press the Start button or the Speed + button on the console. The treadmill will not respond to a CD or video program while the time is flashing. During the CD or video program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change.

CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change.

Page 20
Image 20
Image IMTL07905.0 user manual HOW to Connect Your VCR, Press the Play button on your CD player or VCR