ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not | ||
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is | ||
coated with | ||
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- | ||
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, | ||
| and your own phillips screwdriver | |
Assembly requires the included allen wrenches | ||
and wire cutters | . |
|
Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled.
Internal Star | 1” Tek Screw |
Washer |
|
Upright Bolt |
|
|
1. Make sure that the power cord is unplugged. | 1 | 97 |
With the help of a second person, carefully raise the | ||
Uprights (97) to the position shown. Insert one of the |
|
|
Extension Legs (92) into the base of the Uprights. (Note: |
|
|
It may be helpful to tip the Uprights forward as you insert |
|
|
the Extension Leg.) Make sure that the Caution Decal |
|
|
(91) is in the indicated location. |
|
|
Insert the other Extension Leg (not shown) in the same |
|
|
way. |
|
|
|
| 91 |
|
| 92 |
6
