Image IMTL09905.0

If the speed or incline settings are too high or too

low, you can manually override the settings by

pressing the Speed or Incline buttons on the con-

sole. However, when the next “chirp” is heard,

the speed and/or incline will change to the

next settings of the CD or video program.

To stop the walking belt at any time, press the

Stop button on the console. The time will begin to

flash in the Pace/Time display. To restart the pro-

gram, press the Start button or the Speed in-

crease button. After a moment, the walking belt

will begin to move at 1 mph. When the next

“chirp” is heard, the speed and incline will

change to the next settings of the CD or video

program.

When the CD or video program is completed, the

walking belt will stop and the time will begin to flash

in the Pace/Time display. Note: To use another

CD or video program, press the Stop button or re-

move the key and go to step 1 on page 20.

Note: If the speed or incline of the treadmill

does not change when a “chirp” is heard:

•Make sure that the indicator on the iFIT.com

button is lit and that the time is not flashing in

the Pace/Time display. If the Pace/Timedis-

play is flashing, press the Start button or the

Speed increase button on the console.

•Adjust the volume of your CD player or VCR.

If the volume is too high or too low, the con-

sole may not detect the program signals.

•Make sure that the audio cable is properly

connected, that it is fully plugged in, and that

itis not wrapped around a power cord.

•If you are using your portable CD player and

the CD skips, set the CD player on the floor or

another flat surface instead of on the console.

Follow your progress with the LED track and

the displays.

See step 5 on page 10.

Measure your heart rate if desired.

See step 6 on page 11.

Turn on the fan if desired.

See step 7 on page 11.

When you are finished exercising, remove the

key from the console.

See step 7 on page 13.

CAUTION: Always remove iFIT.com CDs and

videocassettes from your CD player or VCR

when you are finished using them.