![](/images/new-backgrounds/1145628/14562833x1.webp)
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console.
To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown:
An “E” (for English) or an “M”
(for metric) will appear in the lower right corner of the dis- play. Press the Speed in-
crease button to change the unit of measurement, if de-
sired. IMPORTANT: If a “d” appears in the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the display will remain lit, although the
buttons will not operate. If a “d” appears when the in- formation mode is selected, press the Speed de- crease button so the “d” disappears.
The upper left corner of the display will show the total number of thousands of steps taken by all users of the treadmill. For example, the number 396 would indi- cate 396,000 steps taken.
The lower left corner of the display will show the total number of hours that the treadmill has been used and
the total number of miles (or kilometers) that the walking
belt has moved, for a few seconds at a time.
To exit the information mode, remove the key from the console.
17